Disclaimer

---

Effective Date: January 7, 2025

Company: The GMN Group, LLC

IMPORTANT SAFETY INFORMATION

CRITICAL: BY USING THIS APP, YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT:

These results DO NOT constitute a respirator fit test as described in 29 CFR 1910.134 or required by any other regulatory body or authority.

This app is a sizing guidance tool ONLY. It is NOT a substitute for:

• Professional fit testing required by OSHA (29 CFR 1910.134)
• Qualitative or quantitative fit testing
• Manufacturer fitting protocols
• Medical evaluation
• Safety professional consultation
• Any regulatory compliance requirements

Before Using a Respirator:

1. ✓ You MUST complete proper fit testing as required by OSHA (29 CFR 1910.134) or applicable regulations
2. ✓ You MUST be medically cleared to wear a respirator
3. ✓ You MUST follow all manufacturer instructions
4. ✓ You MUST receive proper training
5. ✓ You MUST comply with all applicable federal, state, and local regulations

Limitations:

• Sizing suggestions are estimates based on facial measurements
• Actual fit depends on many factors including facial features, facial hair, scarring, and respirator design
• Different manufacturers size respirators differently
• This app cannot detect air leaks or verify proper seal
• This app does not test for proper respirator function or protection

Your Responsibility:

YOU are responsible for ensuring proper respirator fit and function through appropriate fit testing methods. Improper fit can result in exposure to hazardous substances and serious injury or death.

Regulatory Compliance:

This app does not fulfill any regulatory requirements for respirator fit testing under OSHA, MSHA, or any other regulatory authority. You must comply with all applicable regulations independently of using this app.

When in Doubt:

Consult with a certified industrial hygienist, safety professional, or occupational health provider.

By using this app, you acknowledge that you understand these limitations and agree that these results do not meet fit testing requirements under 29 CFR 1910.134 or any other regulatory standard.

Contact

The GMN Group, LLC Email: mike@gmngroupllc.com Website: www.3DFIT.net